ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
Inspect components for breaks, cracks and other damage.
Check rubber buffer(s) for deterioration, damage and cracks, in particular around mounting hole.
Replace components as necessary.
Insert cotter pin (6) through pin (2), then bend prongs around pin.
Slide flat washer (5) over pin (2).
Install rubber buffer(s) (4) in pallet, align mounting holes with those in pallet, then insert pin (2).
Slide flat washer (3) over pin (2).
Insert cotter pin (1) through pin (2) and bend prongs in opposite directions, around pin (2).