ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
b. Repair
(1)
Replace cracked, distorted or broken link (6).
(2)
Remove burrs from plates (4) and ends of pin (2).
(3)
Replace circlips (1) and (3) if bent or distorted.
(4)
Clean all components with an oil soaked cloth, then dry with a clean cloth.
CAUTION
When installing link (6) ensure the recessed portion is on the same side as the "other side up"
stencil markings.
c. Installation
(1)
Position link (6) in push bar (7), and align holes.
(2)
Insert pin (2) through bottom plate (4) and bottom hinged lug of link (5), so that circlips can be installed.
(3)
Install circlips (3) and (1) on end of pin (2).
(4)
Push pin (2) through top lugs and at the same time, slide circlips (3) and (1) far enough along the pin, to enable
pin (2) to locate in all four lugs, with the circlip grooves to the inside of link lugs (5).
(5)
Locate circlips (1) and (3) in their grooves on pin (2).
(6)
Check link (6) swivels freely.
2-73