ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
USE OF TOOL - DOWEL INTACT
USE OF TOOL - DOWEL BROKEN
Remove any scale and debris in and around hole through thrust face with crocus cloth.
Clean headed pin (3) with cloth or crocus cloth as necessary.
Tap new dowel pin (1) into housing using plastic mallet, until headed pin (3) can be inserted.
Drive headed pin (3) fully in and secure with new cotter pin (2).
Repair any damage to painted surface by patch painting in accordance with TM 43-0139, Painting Instructions for
Change 1 2-81 (2-82 blank)