ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
2-48. ANCHORAGE PIN
This task covers:
a.
INSERT FUNCTION
b.
INSERT FUNCTION
d.
INSERT FUNCTION
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
Materials Required
Clean cloths
Equipment Conditions
Anchorage pin on raised, flat surface.
a.
Removal
(1) Remove panel pin clip (1) from retaining pin (2).
(2) Remove retaining pin from anchorage pin (3).
(3) Remove anchorage pin (3) from lug (4).
b.
Installation
(1) Clean pin holes in anchorage lug (4), and wipe both pins clean.
(2) Insert anchorage pin (3) through anchorage lug (4).
(3) Clean pin hole in anchorage pin, then insert retaining pin (2).
(4) Insert panel pin clip (1) through retaining pin (2).
2-124