TM 9-4120-411-24P
g.
QTY (Column (6). Indicates the quantity of the item used in the breakout shown on the illustration figure,
which is prepared for a functional group, subfunctional group, or an assembly. A V appearing in this column in lieu of a
quantity indicates that the quantity is variable and the quantity may vary from application to application.
4.
EXPLANATION OF INDEX FORMAT AND COLUMNS (SECTION IV)
a.
National Stock Number (NSN) Index.
(1)
STOCK NUMBER column. This column lists the NSN by National item identification number (NIIN)
sequence. The NIIN consists of the last nine digits of the NSN.
NSN
When using this column to locate an item, ignore the first
(e.g., 5385-01-574-1476)
four digits of the NSN. However, the complete NSN (13
digits) should be used when ordering items by stock number.
(2)
FIG. column. This column lists the number of the figure where the item is identified/located. The
illustrations are in numerical sequence in sections II and III.
(3)
ITEM column. The item number identifies the item associated with the figure listed in the adjacent Fig.
column. This item is also identified by the NSN listed on the same line.
b.
Part Number Index. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (vertical arrangement of letters and number combination which places the first letter or digit of each group in
order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1)
Part number column. Indicates the part number assigned to the item.
(2)
Fig. column. This column lists the number of the figure where the item is identified/locate in sections II
and III.
(3)
Item column. The item number is the number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
c.
Referenced Designator Index (if applicable). Reference designators in this index are listed in ascending
alphanumeric sequence (vertical arrangement of letter and number combination which places the first letter or digit of
each group in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1)
Reference Designator column. Indicates the reference designator assigned to the item.
(2)
Fig. column. This column lists the number of the figure where the item is identified/located in the repair
parts list or special tools list.
(3)
Item column. The item number is the number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
5.
SPECIAL INFORMATION.
5