ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
Item
Interval
Location
Procedure
Not Fully Mission Capable
No.
Checked Or
If:
Serviced
7
See Table
Bankseat Beam
a.
Check for damage to both sets of jaw
Damage to both sets of
2-2
blocks (23), guide plates (24), com-
jaw blocks, guide plates,
pression faces (25), dowel pins (26),
compression faces,
resilient mount brackets and pins
dowel pins, resilient
(27), and ramp shelf (28).
mount brackets and pins,
and ramp shelf.
b.
Check for security of carrying bar
Carrying bar brackets are
brackets (29).
not secure.
c.
Inspect the area around all welds for
Evidence of corrosion,
corrosion and cracking, distortion
cracks, distortion and
and damage and also top and bottom
damage around all welds,
chords (30), jack post brackets (31)
top and bottom chords,
and sway brace brackets (32). Pay
jack post brackets, sway
particular attention to push
bar brace brackets and push
brackets (36).
bar brackets.
d.
Inspect shoot bolts for security and
Shoot bolts not secure
correct operation (33).
and not operating correct-
ly.
e.
Check for damage to the protective
paint film.
f.
Inspect resilient mounts for freedom
Freedom of movement in
of movement (27), and ensure resil-
resilient mounts and pins
ient mount cotter pin is secure.
not secure.
g.
Inspect all main pin holes (34), dowel
Evidence of corrosion,
holes (35), jack post bracket (31),
blockage and wear in
push bar brackets (36) and sway
main pin holes, dowel
brace bracket holes (32) for corro-
holes, jack post bracket,
sion, blockage and wear.
push bar brackets and
sway brace bracket holes.
Change 2 2-15
