ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
TABLE 2-3. Unit Preventive Maintenance Checks and Services (Continued)
Item
Item To Be
Not Fully Mission
No
Interval
Checked Or Serviced
Procedure
Capable If :
h. Check operation of plunger assem-
Plunger assemblies are
blies (197) securing bearing plates.
not operating properly in
securing bearing plates.
i. Examine bearing pads (198) for dam-
Bearing pads are dam-
age and wear.
aged and worn.
j. With bearing plates fully in, measure
Gap between bearing
gap between top of rollers in up posi-
plates and top of rollers is
tion and bearing plate. Gap should be
less than the 0.075 m
0.075 m (1.9 mm) minimum.
minimum.
Change 2 2-49
