ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
2-37 ANTI-FLUTTER TACKLE
This task covers:
a.
Inspection
b.
Removal/Installation
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
Materials Required
Rope, 0.394 in (10 mm) diameter x 128 in (3251 mm) long, 8 plait green polyester
Equipment Conditions
Anti-flutter tackle on raised, flat surface.
a. Inspection
(1)
Examine rope assembly (1) for chafing and wear.
(2)
Examine hook (2) and thimbles (3) for damage and distortion.
(3)
Check coupling (4) for freedom of movement.
(4)
Check tension in toggle bar spring (5), then check for damage and distortion in spindle (6) and foot (7).
b. Removal/Installation
(1)
If rope needs replacement, drive out pins (8) and (9) and remove rope assembly (1).
(2)
Fit new rope and secure with pins (8) and (9).
(3)
If hook (2), or coupling (4) need replacing, remove and fit new component.
(4)
If toggle bar assembly (10) needs replacing, drive out spring pin (8) and remove assembly from rope.
(5)
Fit new toggle bar assembly (10) and secure in place with spring pin (8).
2-100
