ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/3
3-4.
PANEL ERECTION AID
This task covers:
a.
Inspection
b.
Repair
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
Materials Required
Cleaning solvent (3, Appendix C)
Clean cloths
Crocus cloth (10, Appendix C)
Equipment Conditions
Panel erection aid on raised, flat surface.
a. Inspection
(1)
Remove grease, dirt and all other foreign matter.
(2)
Carry out a thorough visual examination to determine damage or identify faulty parts.
b. Repair
(1)
Replace Locking Plate.
(a)
Unscrew and remove locknuts (1) and washers (2) from bolts (3).
(b)
Remove bolts (3) and spacers (4), then remove locking plate (5) from beam assembly (6).
(c)
Replace locknuts (1).
(d)
Replace spacers (4) if worn or damaged.
(e)
Replace bolts (3) if wrench faces or threads are damaged.
(f)
Connect new locking plate (5) to beam assembly (6) with bolts (3) - spacers (4), locate between
beam and locking plate.
(g)
Assemble washers (2) and locknuts (1) on bolts (3).
3-12
