ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
Inspect all components for breaks, cracks, corrosion and other damage.
Report full details of damage on shackle anchor assembly to Direct Support Maintenance.
Replace components as necessary.
Slide shackle (4) over shackle anchor assembly (5) so that holes are aligned.
Insert bolt (2) through shackle (4) and anchor assembly. Bolt head must face rubber buffer end of pallet.
Screw nut onto bolt and tighten.
Insert cotter pin (1) through hole in bolt (2), and bend prongs of cotter pin in opposite directions around bolt.
If shackle pin (6) is fitted, insert through shackle (4) and anchor assembly (5) with head of pin facing rear of
Secure shackle pin (6) with cotter pin (1) bending prongs in opposite directions around shackle pin.