ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
2-40. POST TENSIONING ASSEMBLY, CATCH ASSEMBLY
This task covers:
a.
Inspection
b.
Removal
c..
Installation
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
Materials Required
Jointing compound (6, Appendix C)
Equipment Conditions
Catch assembly on post tensioning assembly. Post tensioning assembly on raised, flat surface
a.
Inspection
(1)
Inspect catch assembly (1) for burrs, damage and distortion. Remove any small burrs with a flat file or
replace with new catch assembly if badly damaged.
(2)
Inspect rubber block (2) for cracking and wear, replace with new rubber if badly worn.
2-106