ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
b.
Removal
(1)
Tap out spring pin (3) then remove catch assembly (1) from post (4).
(2)
Remove two countersunk screws (5), then remove rubber block (2).
(3)
Remove old jointing compound from rubber block (2) and catch assembly (1).
c.
Installation
(1)
Smear jointing compound on plate of rubber block (2).
(2)
Install rubber block (2) in catch assembly (1), and secure with two countersunk screws (5).
(3)
Position catch assembly (1) on post (4), then tap in spring pin (3).
(4)
Check that catch assembly pivots freely.
2-107