ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
2-24 PUSH BAR, LINK
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
Shop Equipment, Common No.1 (2, Appendix B, Section III)
Materials Required
Lubricating oil, (2, Appendix C)
Clean cloths
Equipment Conditions
Push bar on raised, flat surface
a. Removal
(1)
Remove circlip (1) from its groove in pin (2), then slide circlip (1) along pin (2) and up to circlip (3).
(2)
Lower pin (2) from top plate (4) and clear of link upper lug (5).
(3)
Remove both circlips (1), (3) from pin (2).
(4)
Remove pin (2) from push bar (7).
(5)
Remove link (6) from push bar (7).
2-72
