ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/2
b. Removal
(1) Flanged Roller Assembly
(a)
Unscrew and remove the two setscrews (1) and washers (2) securing plate (3) to roller beam, and lift off
plate from shaft end (4).
(b)
Remove flange roller assembly (5) from roller beam.
(2)
Plain Roller Assembly
(a)
Remove the two cotter pins (6) from headless pin (7).
(b)
Hold plain roller assembly (8) and remove headless pin (7).
(c)
Remove plain roller assembly from roller beam.
c. Installation
(1)
Flanged Roller Assembly
(a)
Place new flanged roller assembly (5) into roller beam and position plate (3) over shaft end (4).
(b)
Secure plate (3) to roller beam with two washers (2) and setscrews (1).
(2)
Plain Roller Assembly
(a)
Position new plain roller assembly (8) in roller beam, and insert headless pin (7).
(b)
Insert cotter pins (6) through holes in headless pin (7), and bend the prongs in opposite directions around
the pin.
2-75
