ARMY TM 5-5420-212-23
MARINE CORPS TM 08676A-23/3
3-11 LANDING ROLLER
This task covers:
a.
Disassembly
b.
Inspection
c.
Repair
d.
Assembly
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK) (1, Appendix B, Section III)
2 caliper face wrenches (9, Appendix B, Section III)
Protective gloves
Materials Required
Grease, (1, Appendix C)
Cleaning solvent (3, Appendix C)
Crocus cloth (10, Appendix C)
Clean cloths
Boiling water in container large enough to submerge roller
Equipment Conditions
Roller assembly removed from landing roller (para. 2-22) and placed on raised flat surface.
a.
Disassembly
WARNING
Components suspended In boiling water can cause severe burns. Always use protective gloves.
(1) Remove spring pin (1).
(2) Unscrew and remove flanged nut (2) from flanged sleeve (3) using caliper face wrenches.
3-56
